Reference NAGRA mono amplifiers

TECHNICAL SPECIFICATION
ELECTRONICS

Power: 300 W RMS per channel into 8 Ω
30 W pure class A
1000 W RMS on lower impedance
Sensitivity: 1 V or 2 V RMS
Bandwidth: 0 Hz to 120 KHz, +0/-0.5 dB
Crosstalk: Not related for mono amplifiers
Signal-to-noise ratio: Typically 110 dB
ASA “A” weighted
THD+N: < 0.03% Input type: XLR balanced RCA unbalanced Input impedance: 88 KΩ on balanced input 44 kΩ on unbalanced input DC filter: Toggle switch allows to cut the DC of incoming signals Protection: Overheating > +70° C (158° F)
Remote in and out: 1/8″ jacks in and out can trigger the amplifier on or off from a Nagra MPS or a home automation system
Power cord: IEC C19 this is not the standard IEC but a larger 20A plug