Axiom Tonearm

Home / Axiom Tonearm

Exclusive features of the AXIOM:

* VTF (vertical tracking force) non touch adjustment: on the fly during play.

* SRA adjustment is independent from tonearm height (fixed mounting head)

* Dynamic tunable effective moving mass – from 22 gr to 42 gr effective moving mass in fixed mounting version,  from 29 gr to 48 gr effective moving mass in SME-bayonet version.

* Dynamic anti-skating – w/exchangeable inserts for any tangential curve!

* Nano ceramic hardened titanium/carbon – composite armwand with internal liquid dampening on whole inner surface.

* Exchangeable inserts in counterweight tuned to cartridge’s compliance.

Thus eliminating low frequency resonance peak.

* The AXIOM and it’s bearing axis can be precisely leveled on it’s own. This is independent from the plinth’s level and done with 3 precision set screws

around the centre mounting screw (these are covered by the large round metal cap and not visible when mounted).

All these features listed above you will find in the AXIOM only.

General features of the AXIOM:

* The AXIOM is a full dynamically balanced design

* The AXIOM is a full lateral balanced design

* The AXIOM is a special 12″ design with mounting distance of 9-10″ tonearm

* The AXIOM is a full dynamic balanced design

* The AXIOM is a full lateral balanced design

* Full radial/axial cardan shaft double gimbal bearing, using custom made to order German nano instrumental ball bearings of aerospace grade with the lowest move friction possible today.

* Bearings are mounted in a certified laboratory under controlled clean-air room conditions and with the bearing-house preheated to ensure perfect contact closure fit of bearings

after cool down.

* The mounting board, bearing houses, external and internal VTA tower and fixed headshell mounting are made from triple-tempered German AP70XX

dural air frame grade aluminium and stress-relieved V2a stainless steel.

* The mounting plate is hardened V4a stainless steel and Tungsten-carbide.

* The counterweight assembly is made from German HD18 Tungsten.

* The arm wand is an unique composite of Titanium and Carbon with surface liquid dampening.

* Internal wiring is pure silver litz w/soft Teflon insulation (other options available on customer’s wish and directive).

* The AXIOM follows an all new geometrical design.

* The AXIOM is a 12″ effective length design.

Nevertheless, the mounting distance of the AXIOM is the same as with most

standard 9″-10″ tonearms!

Watch a short introduction of The Axiom by Dietrich Brakemeier.

For further info please  Click Here

Contact Us

We're not around right now. But you can send us an email and we'll get back to you, asap.