Kronos Audio Specifications
Click on picture for a larger view
Dimensions: 22w x 14d x 11h (inch) 56w x 36d x 28h (cm)
Weight: 90 lbs. 41 kg.
Crate dimensions: 25w x 17d x 15h (inch) 64w x 43d x 38h (cm)
Weight: 120 lbs 55 kg
Rotational speed: 33.3 rpm & 45 rpm.
Tonearm lenght: 9 to12
Power supply: dual channel pure class A linear DC.
AC voltage input: 110v or 220v factory set.
DC voltage output: 0 to 5 volt , dual cpu controlled, factory calibrated.
DC transmission: pico 3 pin cable.
Data input/output bus: RS232.
Transmission: pico 4 pin cable.
Motors: 2432 precious brushes DC motors (qty 2)
Motor mounts: Delrin enclosure, height adjustable.
Speed guidance system: continuous open loop feedback.
Sensors type: optical diode I/O (each platter)
Correction cycle: every two rotations. 1.5% max. 0.05% min.
Monitoring: twin real time speed led display.
Command input type: 1 capacitance sensor on/off (left)
1 capacitance sensor 33/45 (right)
Platters type: Composite layers and encapsulated & balanced.
Platter weight: 30 lbs.
Drive: 3 silicone/viton 1.8 sting belts / platter
Compensation pulley: teflon and chrome steel bearing.
Lubricant: synthetic grease.
Service interval: 1 year (clean and re-grease)
Main bearings: dual hydraulic isolated inverted sleeve and ball.
Shaft type: grounded heat hardened tool steel pvd coated.
Ball type: ceramic top platter, steel lower platter.
Lubricant: 8 ml. variable viscosity synthetic oil.
Service interval: 5 years (clean and re-oil)
Suspension: full floating top suspended.
Elastomers: 317 o-rings, viton/silicone mix.
Service life: lifetime.
Additional Info:
